OverDosed Performance // ODParts.ca - Performance Parts, Auto Parts, Drift Parts - Canada's #1 Source for Automotive Parts & Accessories

ESR WHEELS CANADA JNC WHEELS CANADA
WHATS NEW  
     
06/23/2016 - AEM X-SERIES DIGITAL GAUGES
MISHIMOTO INTAKE MUSTANG 2015

AEM's new X-Series Digital Gauges combine incredible looks, increased readability and a multitude of new, easy-to-use features! X-Series Digital Display Gauges are available for Boost, EGT, Fuel/Oil Pressure, Oil/Water/Trans Temperature and Volts. These new gauges complement the X-Series Digital Wideband AFR gauge.

Visual improvements include a bright three- or four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED "needle" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see displayed values at a glance.  Click for more info...

01/18/2016 - MISHIMOTO AIR INTAKE: 2003-2006 NISSAN 350Z
MISHIMOTO INTAKE 350Z
Add some horsepower and sound to your Nissan 350Z’s VQ35DE engine with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2003–2006 Nissan 350Z and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides maximum gains of 10 whp & 13 wtq over the stock intake while maintaining safe air/fuel ratios. This kit is simple to install, making it perfect for some extra punch on the street or autocross course.

The Mishimoto Nissan 350Z Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The stock MAF housing is retained which translates into a smooth power band with safe air / fuel ratios. To reduce air intake temperatures (IATs), a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The heatshield bolts right up to the stock inlet duct on the front support to draw in the maximum amount of outside air into the filter. The heatshield also comes fully assembled with protective rubber strips to fully seal it from hot engine bay heat and prevent any vibrations during operation.Click for more info...
01/18/2016 - ISC N1 COILOVER SYSTEM: 2015+ FORD MUSTANG
ISC SUSPENSION N1 COILOVERS
The ISC N1 Coilover system is the optimum suspension tool for improved handling for your street, track, or drift car. This product is perfect for someone looking for performance, adjustability, and other high quality features in a package that will not break the bank. ISC coilovers are also 100% rebuildable!

ISC's self-manufactured N1 allows them to have top grade quality control and innovative R&D capabilities due to their in house/self-made company dynamic. ISC Suspension utilizes some of the best modern engineering techniques and suspension design. ISC has been present in the world for over 13 years and has accomplished drift, road course, street, and other various podiums alike. Over a decade of experience, knowledge, engineering, and feedback have shaped the ISC N1 system into what it is today. All ISC Coilover systems are proudly serviced and distributed in Gilford, NH. Click for more info...
12/29/2015 - HSD Suspension Systems - FREE SHIPPING IN CANADA!
HSD COILOVER SUSPENSION

★ HSD COILOVERS ★ GET READY FOR 2016 / SOYEZ PRÊT POUR 2016 ★
➥ DUALTECH & MONOPRO Coilover suspension systems available for many vehicle applications!! / Suspensions Coilovers DUALTECH & MONOPRO disponible pour plusieurs véhicules!

Get FREE SHIPPING within Canada on all HSD Coilovers!!! / Nous offront le SHIPPING GRATUIT, donc pas besoin de vous déplacé!

Follow us on IG / Suivez nous sur Instagram @ instagram.com/odperformance

Contact us directly by Facebook private message, or by E-Mail...
Canada: info@odparts.ca / Contactez nous directement par message privée ou par courriel au info@odparts.ca

11/30/2015 - FAST Wheels December Deals! + FREE SHIPPING IN CANADA!
FAST NEMESSIS FAST NINETEEN 80

Save BIG on FAST Nineteen 80 & FAST Nemessis, plus get FREE SHIPPING within Canada for the Month of December!!! Deal available until the end of the month, or until supplies last.

Follow us on IG @ instagram.com/odperformance

Contact us directly by private message, or by E-Mail... Canada: info@odparts.ca

11/30/2015 - CYBER WEEK SALE!!! From Nov 29th to Dec 5th!!

★ CYBER WEEK SALE NOW ON ★ FREE SHIPPING ★➥ Free Shipping on all orders placed between Sunday, November 29th &...

Posted by OverDosed Performance on Monday, November 30, 2015
11/18/2015 - COBB AccessPort V3 for Porsche Cayman/Boxter (981)
COBB ACCESSPORT V3 PORSCHE CAYMAN BOXSTER 981

COBB has announced Accessport V3 support for the 981 chassis Porsche Cayman and Boxster. The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.

981 Tune Specifications

2014-2015 Cayman (981) 2.7L MT, PDK
2012-2015 Boxster (981) 2.7L MT, PDK

Stage1 91:
Max % Tq Gains: 10%, Max % Hp Gains: 10%
Peak % Tq Gains: 8% , Peak % Hp Gains: 5%

Stage1 93:
Max % Tq Gains: 14%, Max % Hp Gains: 14%
Peak % Tq Gains: 9%, Peak % Hp Gains: 5%

2014-2015 Cayman S (981) 3.4L MT, PDK
2012-2015 Boxster S (981) 3.4L MT, PDK

Stage1 91:
Max % Tq Gains: 5%, Max % Hp Gains: 5%
Peak % Tq Gains: 3%, Peak % Hp Gains: 4%

Stage1 93:
Max % Tq Gains: 8%, Max % Hp Gains: 8%
Peak % Tq Gains: 5%, Peak % Hp Gains: 7%

2015 Cayman GTS (981) 3.4L MT, PDK
2015 Boxster GTS (981) 3.4L MT, PDK
Stage1 93:
Max % Tq Gains: 7%, Max % Hp Gains: 7%
Peak % Tq Gains: 4%, Peak % Hp Gains: 5%

2016 Cayman GT4 (981) 3.8L MT
Stage1 91:
Max % Tq Gains: 7%, Max % Hp Gains: 7%
Peak % Tq Gains: 1%, Peak % Hp Gains: 2%

Stage1 93:
Max % Tq Gains: 9%, Max % Hp Gains: 10%
Peak % Tq Gains: 3%, Peak % Hp Gains: 5%

Applications
2014-2015 Cayman 2.7L MT and PDK
2014-2015 Cayman S 3.4L MT and PDK
2015 Cayman GTS 3.4L MT and PDK
2016 Cayman GT4 3.8L MT
2013-2015 Boxster 2.7L MT and PDK
2013-2015 Boxster S 3.4L MT and PDK
2015 Boxster GTS 3.4L MT and PDK

Part Number: AP3-POR-007

Retail: $1295.00 USD ($1774.15 CAD)

Contact us by E-Mail for more info and to place your orders! Canada: info@odparts.ca / USA: info@odpartsusa.com

11/13/2015 - Tomei Expreme Ti Mufflers for Toyota AE86
TOMEI EXPREME TI EXHAUST MUFFLER TOYOTA AE86

Redefine the AE86. The 2 ultimate exhausts for every AE86 enthusiast.

TYPE-R / Ultra lightweight under axle exhaust / Part# TB6090-TY01A
TYPE-S / High performance exhaust with hassle-free stock layout / Part# TB6090-TY01B

An Impressive 15.65~14.44lbs (7.1kg~6.55kg) Weight Reduction!!
Now taking Pre-Orders!!

Contact us by E-Mail for more info and to place your orders! Canada: info@odparts.ca / USA: info@odpartsusa.com

11/07/2015 - aFe Control Lowering Springs for 2012-2015 BMW 228i/328i
AFE CONTROL LOWERING SPRINGS 2012 2013 2014 2015 BMW 228i 328i

aFe Control has released their Lowering Springs for the 2012-2015 BMW 228i (F20) or 328i (F30) with the 2.0L (t) N20/N26 engine. These springs are Made in the USA and are engineered to optimize the factory shock absorber damping and offer a 1" drop for the perfect blend of performance and style. The lowering springs will increase cornering and handling performance, giving you the confidence to take that turn without adversely affecting ride quality. The lowered stance will transform the way your BMW looks, as well as offer improved aerodynamics. Designed as a direct fit application these springs require no modifications to the vehicle. 

Features:
• Engineered to optimize the factory shock absorber damping, including selective ride. 
• 1" of drop for the correct relation between looks and proper function 
• Engineering design and race testing ensures the ultimate in quality and longevity 
• 2 Stage, high luster, tangerine orange powder coated finish for unbeatable looks and durability 
• Direct Fit Installation 

Applications:
2012-2015 BMW 228i (F20) L4-2.0L (t) 
2012-2015 BMW 328i (F30) L4-2.0L (t) 
2012-2015 BMW 116i (F2X) L4-2.0L (t) 
2012-2015 BMW 125i (F2X) L4-2.0L (t) 
2012-2015 BMW 220i (F2X) L4-2.0L (t) 
2012-2015 BMW 320i (F3X) L4-2.0L (t) 
2012-2015 BMW 428i (F3X) L4-2.0L (t) 

Part Number: 410-503005-N

Price: $345 USD ($469 CAD)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
10/24/2015 - Cusco 2016 Mazda Miata Coilovers Now Available!!
CUSCO 2016 MAZDA MIATA COILOVERS

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
10/05/2015 - Be Advised that we will be closed between Oct 10th &18th...
WE WILL BE CLOSED

If you have any questions or inquiries, you can e-mail us at info@odparts.ca, and we will get
back to you as soon as we get back. Our regular business hours will resume on Monday, October 19th. 2015.

Thank You!!

LINE
09/17/2015 - GReddy Revolution RS Cat-Back Exhaust for FR-S/BRZ
GREDDY REVOLUTION RS EXHAUST FRS BRZ

GReddy announces the Revolution RS exhaust system for the Scion FR-S & Subaru BRZ, their most aggressive exhaust system they offer. It features full 3” diameter piping for superior performance. The purposeful single-sided cat-back layout exits the left side of the vehicle and produces an effective but light-weight system. The extra large GReddy resonator controls unwanted drone. Like all GReddy Revolution RS systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty. 

Product Details:
Chassis: ZN6 
Engine: 4U-GSE (FA20) 
Type: Cat-back large diameter single muffler system 
Number of pieces: 2pcs 
Piping: 76 mm (3.0") 
Tip: 115mm (4.5") 
Gasket(s): 3.0" oval (qty: 1 included) replacement 
Resonator: yes 
Weight: 21.5 lbs (Stock weight 39 lbs) 
Sound level: 107 dB(a) 

Application: 2013-2015 Scion FR-S/Subaru BRZ  / Part Number: 10118102 

MSRP: $595.00 USD ($850 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/29/2015 - TEIN Flex A Coilovers Now Available!!
TEIN FLEX A COILOVERS

TEIN has introduced their Flex A coilover line which is available by special order only. TEIN Flex A coilovers feature a twin tube design, 16 level linear damping force adjustment, full ride height adjustment, as well as an internal hydraulic bump stopper (H.B.S) for increased comfort during full suspension compression. 

Features and Benefits:
• Full-Length Ride Height Adjustment Feature - Ride Height Adjustment with Little or No Change in Ride Quality 
• Twin-Tube Structure - For Low Resiliency & Securing Sufficient Stroke 
• Damping Force Adjustment System - 16-level Linear Damping Force Adjustment System 
• Complete Kit with Upper Mount - Exclusively Designed Upper Mounts are Included (Except Some Models) 
• 1-Full-Car-Kit - Complete Suspension Kit of 4 Shock Absorbers & 4 Springs 

Concepts:
1. New Hydraulic Bump Stopper (H.B.S.) for Comfortable Ride in ALL Seats 
2. Twin-Tube System for Comfortable Ride on Streets 
3. Full-Length System for Ride Height Adjustment w/ Minimal Change in Ride 
4. Damping Force Adjustable to Change Ride to Desired Settings 
5. Compatible with EDFC Series to enable In-Car Damping Force Adjustment 
6. Upper Mounts Included for Easy Installation 
7. Highly Durable & Reliable 
8. Thoroughgoing Rust-Proofing 
9. Highly-Rigid Bracket & Shell Case 
10. Smooth Ride Height Adjustment & One-of-A-Kind Adjusting Wrench 
11. No-Sag Springs 
12. High-Spec Damper Oil 
13. Available for Overhaul & Revalving

Starting at: $1007.00 USD ($1369.00 CDN) *Cick here to view application guide

 In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/22/2015 - Magnaflow Exhaust System for 2015 Audi S3
MAGNAFLOW EXHAUST AUDI S3

Magnaflow's catback exhaust system for the 2015 Audi S3 is now available. The MagnaFlow Sport Series Exhaust System is designed for those seeking maximum performance, reduced mass and an aggressive exhaust note that demands attention. This system features 3" stainless steel tubing with polished quad tips. 

Features and Benefits 
- Lifetime Warranty. 
- Dyno tested and proven to make power. 
- Performance gains in horsepower & torque. 
- Great sound. Has a smooth, deep tone. 
- Easy to install, mandrel-bent. 
- All welded. Built to last. 

Application: 2015 Audi S3 (L4 2.0L) 

Part Number: 19233 
Price: $1442.50 USD ($1947.37 CDN) **CALL OR E-MAIL FOR BEST PRICING IN CANADA!!!!

 In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/22/2015 - Takeda Attack Stage-2 Air Intake for 2015+ Subaru WRX
TAKEDA AIR INTAKE 2015 WRX

aFe Power has introduced the all new Takeda Attack Stage-2 air intake system for 2015-2016 Subaru WRX with the 2.0L turbo engine. In testing, this Stage-2 intake resulted in +28 horsepower and +32 lbs. x ft. torque and outflowed the factory intake by 131%. This system features a high quality one-piece, ABS plastic heat shield and a 3” mandrel bent, wrinkle-black powder-coated aluminum intake tube. Also included is a CAD designed, cross-linked polyethylene, red roto-molded intake scoop that captures cool air from the front of the vehicle and directs it straight to the air filter. The large 5” tall washable/reusable conical performance air filter is constructed using 100% polyurethane for long life and multiple cleaning cycles. This direct bolt-on system requires no modifications and includes all necessary hardware for a hassle-free installation. 

Features and Benefits 

CAD Designed Intake Scoop 
This system uses cross-linked poly- ethylene red plastic, CAD designed, roto-molded intake scoop. This captures the coolest air available and directs the airflow right on the filter, lowering intake temperature and increasing power. 

High Quality Plastic Heat Shield 
High quality ABS plastic heat shield maintains a perfect fitment and blocks out unwanted engine heat eliminating heat soak. 

Mandrel-Bent Intake Tube 
A wrinkle-black 3” diameter mandrel-bent intake tube is used to smoothly direct the increased airflow into the turbo for maximum performance. 

Application: 2015-2016 Subaru WRX FA20 (2.0L) 

Part Numbers 
TA-4305B-R : Attack Air Intake System With Pro 5R Filter 
Price: $375.00 USD ($506.25 CDN)

TA-4305B-D : Attack Air Intake System With Pro Dry S Filter 
Price: $375.00 USD ($506.25 CDN)

 In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/22/2015 - StopTech Big Brake Upgrades for 2015 Subaru WRX
STOPTECH BBK WRX STI

OverDosed Performance is excited to introduce you to StopTech's Big Brake Kits for the 2015 Subaru WRX. StopTech High Performance Big Brake Kits offer significantly improved braking performance, feel and modulation over stock systems and are available in a variety of caliper color/rotor finish options. 

In extensive track testing with professional drivers, the front-only and 4-wheel StopTech BBKs for the Subaru WRX ran significantly cooler than the stock components. Drivers experienced less fade, better pedal feel and easier modulation. They also noted improved handling and steering thanks to front brake components that weigh approximately 9 pounds less per corner than stock. 

The FRONT StopTech Big Brake Kits for the 2015 Subaru WRX include a pair of drilled or slotted 355 x 32 mm StopTech 2-piece AeroRotors and four-piston StopTech ST-40 calipers, as well as mounting brackets, stainless steel lines and StopTech Street Performance brake pads. 

The REAR StopTech Big Brake Kits for the 2015 Subaru WRX include a pair of drilled or slotted 345 x 28 mm StopTech 2-piece AeroRotors and two-piston StopTech ST-22 calipers, as well as mounting brackets, stainless steel lines and StopTech Street Performance brake pads. 

StopTech Big Brake Kits Include 
• StopTech ST Calipers - stiffer, forged, differential-bore calipers with a patented bolt-in bridge that eases pad changes while increasing caliper stiffness 

• StopTech 2-piece AeroRotors - pre-assembled, directional iron rotor rings with patented AeroVane fin design and aluminum AeroHats for optimal cooling 

• StopTech Street Performance Brake Pads – Kevlar-like, para-aramid composite pads for aggressive street driving and occasional track day or autocross use 

• StopTech Stainless Steel Brake Lines - braided stainless steel shielded Teflon-like lines for less system compliance and greater durability 

• Mounting Brackets & Hardware – hard-anodized, billet aluminum mounting brackets with stainless steel studs and all of the necessary hardware for easy installation 

Application: 2015 Subaru WRX 

Part Numbers 
Front BBK : 83.843.4700.xx 
Prices Starting at: $2845 - $3745 USD ($3840 - $5055 CDN)

Rear BBK : 83.843.002G.xx 
Prices Starting at: $2645 - $3545 USD ($3570 - $4785 CDN)

 In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/10/2015 - Sparco Sprint Competition Seat
SPARCO SPRINT SEAT

The Sprint is Sparco's entry level competition seat, perfect for weekend racers. It carefully balances safety, styling and value. The fastenings for side or bottom attachments on the tubular frame are better positioned on the shell while the holes for fifth and sixth seatbelt points provide improved safety. This seat is made from fire retardant fabric and features contrasting quilting. Available in black, blue and red and is FIA approved. 

Features and Benefits 
- Additional side attachment fastenings on the tubular for better positioning 
- Includes holes for fifth and sixth seatbelt points 
- Fire retardant fabric with contrasting quilting 
- FIA approved 

Part Numbers 
Black : 008231NR 
Blue : 008231AZ 
Red : 008231RS

Price: $395.00 USD ($529.30 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/06/2015 - Clutch Masters Honda/Acura B-Series Hydraulic Bearing
CLUTCHMASTERS B-SERIES HYDRAULIC BEARING

Clutch Masters introduces their new Internal Hydraulic Bearing for the Honda / Acura B-Series transmissions. Clutch Masters has finally meet the demand from many customers who have requested this style bearing which eliminates the OEM clutch fork and release bearing as well as the OEM slave cylinder. 

The Clutch Masters hydraulic bearing is a direct bolt on when using a Clutch Masters FX725 series unit. Other versions of a hydraulic bearing require an upgraded master cylinder and reservoir, however the Clutch Masters Hydraulic Bearing requires no modifications or alterations to the gearbox or master cylinder. The Clutch Masters Hydraulic Bearing is tested and manufactured in the USA to ensure the highest quality and our standards. 

Price: $313.95 USD ($420.09 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
08/06/2015 - **NEW PRODUCT** TEIN Flex Z Coilovers
TEIN FLEX Z COILOVERS

TEIN has announced the release of their new coilover line named Flex Z. The Flex Z is a twin-tube design coilover which is height and damping adjustable. The Flex Z is compatible with TEIN's EDFC controllers for even greater handling control from within the vehicle. Details and specifications are outlined below. 

Features and Benefits 

• Full-Length Ride Height Adjustment Feature - Ride Height Adjustment with Little or No Change in Ride Quality 

• Twin-Tube Structure - For Low Resiliency & Securing Sufficient Stroke 

• Damping Force Adjustment System - 16-level Linear Damping Force Adjustment System 

• Complete Kit with Upper Mount - Exclusively Designed Upper Mounts are Included (Except Some Models) 

• 1-Full-Kit - Complete Suspension Kit of 4 Shock Absorbers & 4 Springs

Starting at $760.00 USD ($1018.00 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
07/29/2015 - RAYS Engineering Dura Lug Nuts Now Available!
RAYS ENGINEERING DURA LUG NUTS

RAYS DURA series lug nuts, which are now available at OverDosed Performance, are constructed from A7075 T6 Aluminum (Duraluminum) and are available in 35mm and 42mm lengths. These lugs are extremely strong and lightweight. The unique 7-sided nut uses a special key supplied with the lugs for installation and removal. Color options include Bronze, Black, Blue, Red, and Gunmetal. These kits come in sets with 16 regular lugs and 4 locking lug nuts. 12x1.25 and 12x1.50 threads are available. 

Starting at $175.00 USD ($232.75 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
07/28/2015 - RAYS Engineering Formula Lug Nuts Now Available!
RAYS ENGINEERING FORMULA LUG NUTS

The RAYS FORMULA lug nut is an unique lug nut that involves two keys to remove each lug nut. The top cap of the lug nut uses a special hexagon wrench to remove it. Once the cap is removed, the lug nut can be accessed with another special hex key. The two piece design is very strong and features a 60 degree taper seat and 28mm length. Lugs are available in 12x1.25 and 12x1.5 threads and come in red and blue finishes. These lug kits include 20 lugs, hex adapter, hex wrench, and 20 aluminum caps.

Starting at $330.00 USD ($438.00 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
07/28/2015 - Perrin Performance Gauges Now Available!
PERRIN PERFORMANCE GAUGES

PERRIN Performance has introduced their full line of performance 60mm gauges. PERRIN's new line of gauges help you keep track of engine vitals with accurate readings and an easy-to-read display.

Available Gauges:
Boost Pressure Gauge
Exhaust Temp. Gauge
Oil Temp. Gauge
Oil Pressure Gauge
Water Temp. Gauge
Fuel Pressure Gauge

Starting at $159.30 USD ($209 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
07/28/2015 - RS-R Lowering Springs for 2015+ Acura TLX!
RSR TLX SPRINGS

RS-R introduces their Down Sus Lowering Springs for the 2015+ Acura TLX. The Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its performance. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car, both for performance and for comfort. 

Approximate Drop:
Front 25mm – 30mm (1.0inch – 1.2inch)
Rear 20mm – 25mm (0.8inch – 1.0inch)

Spring Rates:
Front 3.67 kg/mm
Rear 4.59 kg/mm

Application: 2015+ Acura TLX

Price: $279 USD ($371 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
07/28/2015 - RS-R Sports-I Club Racer Coilovers for 2013+ FR-S/BRZ!
RSR FRS COILOVERS

Fine tuned for competition, the RS-R Club Racer Series coilovers for the 2013+ FR-S/BRZ offers unquestionable performance with its track dedicated setup. These 36-way adjustable coilovers will lower the FR-S/BRZ .4"-2.4" in the front and .8"-2.8" in the rear and include front adjustable upper mounts and solid rear mounts. Independent ride height and preload adjustments allow you infinite handling adjustments. The RS-R Club Racer coilovers also come with a 1 year/ 12,000 mile warranty.

Specifications:

Preset Approximate Height From RS-R
Front -20mm to -25mm (-0.8inch to -1.0inch)
Rear -20mm to -25mm (-0.8inch to -1.0inch)

Maximum Adjustment Ranges:
Front +10mm to -60mm (+0.4inch to -2.4inch)
Rear +20mm to -70mm (+0.8inch to -2.8inch)

Recommended Adjustments for Optimal Ride-ability
Front 0mm to -40mm (+0inch to -1.6inch)
Rear +5mm to -40mm (+0.2inch to -1.6inch)

Spring Rates: Front 8.00kg/mm / Rear 8.00kg/mm

Application: 2013+ Scion FR-S / Subaru BRZ

Part Number: XSPIT068M

Price: $2199 USD ($2924 CDN)

In Canada, contact by E-Mail at info@odparts.ca, and in the USA Contact us at info@odpartsusa.com, or by phone 1-450-934-8399.

LINE
05/12/2015 - We are Authorized Dealers for ESR Wheels!
ESR WHEELS
We are now Authorized Dealers for ESR Wheels. ESR offers a wide range of styles and sizes, and their wheels are available in custom colors & finishes. The full line-up will soon be added to our web store, in the meanwhile, please contact us for pricing and availability! By phone at 1-450-934-8399, or by e-mail at info@odparts.ca
LINE
05/09/2015 - Skunk2 Alpha Series Header for 2006-13 Mazda Miata

Skunk2 announces their all-new Alpha Series Header for the ’06-’13 NC Miata. Skunk2's decision to produce the Alpha Series Header was driven by their desire to make the race-proven design more affordable and accessible to everyday enthusiasts. Skunk2’s Alpha Series Header for the NC Miata offers Skunk2 performance, industry-leading customer service, and a full warranty policy, all at a price comparable to lesser budget-minded headers. Skunk2 Alpha Series Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away. 

All Skunk2 headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. Each Skunk2 Alpha Series Header features equal-length, and a 4-1 design that terminates into a True Merged collector with a 2.5-inch outlet. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that’s applicable to a wide range of engine sizes and configurations. Alpha Series Headers also feature bung provisions for OEM sensors. Each header is constructed from stainless steel with mandrel-bent tubing for added strength, corrosion resistance and durability 


Features and Benefits 
- Precise fitment 
- Stainless steel mandrel bent construction 
- 2.5" header outlet 
- Equal length 4-1 design 

Application: 2006-2013 Mazda Miata 

Part Number: 412-10-1900

If you are interested, please contact us by phone at 1-450-934-8399, or by e-mail at info@odparts.ca.

LINE
04/11/2015 - H&R Sport Springs for 2015+ Acura TLX

H&R has just released their Sport Spring kit for the 2015 Acura TLX. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. 

H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany. 

Ride Height: Lowers Vehicle Approximately 1.3" Front / 1.2" Rear 

LINE

04/11/2015 - Mishimoto Intake for 2015+ Mustang EcoBoost

Mishimoto has developed a performance air intake engineered specifically for the 2015+ Ford Mustang EcoBoost. This Mustang air intake features numerous innovative components, including a wire- reinforced turbo inlet hose that will not collapse under suction and boost and prevent the intake pipe from the dreaded heat-soak. The 2015 Mustang air intake is safe to use with the stock tune as it will not hurt air / fuel ratios under load. The air intake also has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the testing video to hear the tone. 

The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The 2015 Mustang air intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox also protects against engine bay heat-soak, and it provides a stock-like engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. Available with either a polished aluminum or wrinkle black pipe, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

Click to view video: https://www.youtube.com/watch?v=dd-mL1G2VUs

LINE

03/02/2015 - Rocket Bunny kit for Lexus RC-F now available for pre-order!
rocket bunny tra kyoto lexus rcf
New Rocket Bunny Tra Kyoto kit for Lexus RC-F is now available for pre-order. If you are interested, please contact us by phone at 1-450-934-8399, or by e-mail at info@odparts.ca.
LINE
02/24/2015 - Klutch Wheels releases some new models & colors for 2015!
klutch wheels km16 km20

Klutch Wheels releases a new model for 2015, the KM16, available in Silver w/Machined Face, Gunmetal w/Machined Face, Fusion Blue, as well as Fusion Red. We're still waiting on sizing details. They also released 2 new color choices for the KM20 wheel, they are now also available in Fusion Blue and Fusion Red.

For pricing and availability, or to place an order, contact us by phone at 1-450-934-8399, or by e-mail at info@odparts.ca

LINE
02/17/2015 - Now taking pre-orders for the Nankang NS-2R Race Tire
Nankang NS-2R Tire

If you're looking for a budget race tire, then look no further. The Nankang NS-2R is a perfect choice for road race and drift applications.We've tested this tire out on one of our drift cars and it performed flawlessly. Sizes are available in 14", 15", 16", 17" & 18". We have limited supply that will be arriving in Canada approximately mid-march 2015, so be sure to place your orders early!

Contact us by phone at 1-450-934-8399, or by E-Mail at info@odparts.ca

LINE
02/16/2015 - Possible new Rocket Bunny kit for S14?

Kei Miura just posted a new project he's working on... a kit for the Nissan S14. We think the new design is awesome, however we still don't know if this is going to be a one off design, or if it'll be mass produced. One thing is for sure, if it does get released to the public, we will be sure to let you guys know!

- Chris

LINE
02/16/2015 - ESM Wheels Releases new models!

The ESM Wheels 014 wheel is now available for purchase! Available sizes are 19x8.5, 19x9.5 as well as 19x11, in 5x112, 5x114.3 & 5x120. We haven't added them to our web shop as of yet, so if you'd like to order a set, just shoot us an e-mail at info@odparts.ca, or you can call us up directly at 1-450-934-8399.

LINE
02/14/2015 - GReddy EVOlution GT Exhaust for Scion FR-S/Subaru BRZ...

The EVOlution GT for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3") piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

To order, please contact us by phone at 1-450-934-8399 or by E-Mail at info@odparts.ca

 
 
 
AE HARDROCK
BOSS MOTORSPORTS
EAGLE ALLOYS
ESR WHEELS
FAST WHEELS
MSR WHEELS
NANKANG TIRE
LINE
We are Authorized and Direct Dealers for:
2F Performance (Super Doof) - Aero Function - American Eagle Wheels - BC Racing - Brian Crower - Bully Clutch - Carbon Creations - CNC - Couture - CX Racing - COBB Tuning - Cosmis Racing Wheels - DAI Alloys - Driven Steering Wheels - ESM Wheels - ESR Wheels - Fast Wheels - HPS Performance - HSD - JNC Wheels - KSport - Manzo USA - Megan Racing - M-Sport Rotors - MSR Wheels - NEO Motorsport - NS Wheels - PhatFux Wheels - Replika Wheels - Ruffino Wheels - Sprint Booster - Spyder Auto - STR Wheels - TOMEI - Vibrant Performance - WeatherTech - Winjet Lighting - Vaero - VooDoo13 - Yonaka Motorsports
 

Company:

Shop Address/Head Office:
Our Social Media Links:
 
 
Blog

1600-A, Boulevard Saint-Elzéar Ouest.

Web Shop

Laval, Québec, Canada, H7L 3N2

About Us

Tel: 1-450-934-8399

Drifting  
Road Racing/Time Attack

E-Mail: info@odparts.ca

Find Us On Facebook  
 
Copyright 2016 © OverDosed Performance, ODParts, ODParts.ca, ODPartsUSA.com are owned and operated by 7755589 Canada Inc.